|
|
|
|
|
When the Windows font size is set to larger than 100%, then the beam and column mode splitter windows did not by default extend far enough to expose all of the input data. This has been corrected and the data is always shown.
In the input for the top lateral support spacing in Beam view, when a value in mm was then the “Run design” button was pressed and you returned to beam view, the decimal place had shifted three spaces to the left. This was a problem in the user interface only; it did not affect design and the design summary output was showing correct values for the top lateral support spacing. This has been corrected.
Occasionally, for multi-span beams with long spans, the span lengths entered become scrambled when constructing the beam model and beam design was not possible. This issue was fixed for most cases for version 9.2, but there remained some situations that were addressed with version 9.3.