|
|
|
|
|
Three Block Roof Joining (Bug 1777 )
The roof on the middle block in a 3-block configuration, when all three blocks have the same width, was not joining with the other two blocks.
Monoslope Roof Creation (Bugs 1599 and 1600)
It was not possible to change the roof angle in roof input view in order to create a 90-degree panel for a monoslope roof situation.
The program behaviour when attempting to create a monoslope roof via a movement of the ridge location was erratic and unpredictable. It was only possible for some building configurations
Monoslope roofs were thus difficult to achieve.
Monoslope Roof Ridge Direction (Bug 1667)
After changing the ridge direction for monoslope roofs, the program would revert to the original ridge direction on the next user input action.
Zero Wall Height for Uneven Blocks (Bug 1569)
If the ceiling joist depth is changed while entering the data in the Structure Input form for a block with fewer stories than other blocks, the wall height on the storey above the lower block's ceiling depth, on the taller block, was being set to zero. This has been corrected
Extend Walls Crash (Bugs 1440 and 1783)
The Extend Walls feature was causing Shearwalls to crash, for complex multi-block structures where adjoining blocks differ in levels by 2 or more, particularly when the blocks are arranged in an L- or U- shape.
Occasionally the program would crash upon pressing Extend Walls for any type of structure. due to random numerical precision issues.
Changing Storey Height after Extend Walls (Bug CSW7-35)
If the storey height is changed in Structure input after Extend Walls is invoked and when imperial units are employed, the walls would sometimes not be moved to the height of the storey that was raised, causing a gap between the wall and the diaphragm above.