Previous Topic

Next Topic

Book Contents

Book Index

Importance Category Output (v9 - Change 157)

If there are snow, wind, or earthquake loads on the member, to which an importance category from O86 4.2.3.2 applies, the program now puts a note beneath the load table in each output report indicating that the input load magnitude does not include the importance factor, which is applied during analysis. It also appears for live loads in the “Low” importance category.

See Also

Loads and Loads Analysis

Automatic Eccentricity of Axial Loads (v9 - Feature 17)

Different Eccentricity for Each Load (v9 - Feature 18)

Importance Factor for Part 9 Snow Loads (v9 - Feature 206)

Default Pattern Load for Roof Joists based on Slope (v9 - Feature 162)

Tributary Width Message Box (v9 - Feature 196)

Applied Moments at End of Full Span (v9 - Bug 2845)

Point Loads at Left End of Rightmost Support (v9 - Bug 2857)

Combining Concentrated and Sustained Live Loads (v9 - Bug 2833)

“Construction” Load Instead of Live Load (v9 - Bug 2852)

Analysis Diagram Dimension Lines (v9 - Bug 2719)

Location and Scale in Point of Interest View Drawing (v9 - Bug 2782)

Tributary Width in Load Table