Previous Topic

Next Topic

Book Contents

Book Index

Maximum Shear within Span Warning for Lightly Loaded Spans (v8.2 - Bug 2486)

If there is an extremely lightly loaded span, for example from a partial load that extends a short distance past a support, then the program sometimes output a warning message regarding maximum shear being within the span, and failed to find a passing design even if such a design existed.

See Also

Beam and Column Engineering Design

Beam and Stringer Grades for Post and Timber Sizes (v8.2 - Bug 2588)

LVL Columns (v8.2 - Change 121)

Glulam Shear Load Coefficient Cv Calculation (v8.2 - Bug 2568)

Structural Composite Lumber Lateral Stability Factor KL (v8.2 - Bug 2586)

Combined Axial and Bending Results for High Pf/Pe (v8.2 - Bug 2587)

Design Search for Combined Axial and Bending (v8.2 - Bug 2610)*

Secondary Moment Check Warning (v8.2 - Bug 2587)

Axial Compressive Resistance fc for Sloped Custom Section Beam Bearing Design (v8.2 - Bug 2597)

Vibration Design for Custom Floor Joist Sections (v8.2 - Bug 2545)

Small Point Load Bearing in Absence of Point Loads (v8.2 - Bug 2607)

Point Load Bearing Design Note (v8.2 - Change 119)

Span Input Corruption for Long Spans (v8.2 - Bug 2455)