Previous Topic

Next Topic

Book Contents

Book Index

Hold-downs

Important Note – These are descriptions to changes implemented in WoodWorks Shearwalls for version 9 and may not reflect current behavior.

  1. Hold-down Table Note for Washers

    The note that appears under the Hold-down Design Table regarding the anchor bolts washers has been changed to refer to SDPWS 4.3.6.4.3 and 4.4.1.6 rather than IBC 2305.3.11. This involved a slight change in wording of the note.

See Also

Design Code Updates: SDPWS 2008, IBC 2012, and ASCE 7-05 Supplement 2

Design Codes Available

Program References

Shearwall Materials and Shear Capacities

Gypsum Underlay

Fasteners

Cub Factor for Unblocked Shearwalls

Height-to Width Ratios and Factors

Perforated Walls

Out-of-plane Bending Design for C&C Loads

Nail Withdrawal Design for C&C Loads

ASCE 7-05 Supplement 2