Previous Topic

Next Topic

Book Contents

Book Index

Highlight of Failing Walls (Feature 75)

If a wall failed design for the design case (wind shear, wind C&C, seismic, rigid diaphragm, or flexible diaphragm) shown on the screen, then the failing wall appears in red. The colour for a selected wall, which used to be red, is now orange. If a failing wall is selected, it appears as a darker shade of red.

A note at the bottom of the screen indicates that orange is for selected walls and red for failing walls. It also indicates the design case being shown on the screen.

See Also

Worst-case Design

Wall Design Groups (Feature 17)

Design Summary (Feature 138)

500mm Stud Spacing for Unblocked Factor (Feature 173)

Hold-down Offset Subtraction from Overturning Moment Arm (Bug 2731, Change 165)

Hold-down Force Accumulation Tolerance ( Change 169)

Non-convergence of Deflection-based Distribution to Segments (Bug 2770)

Uplift Loads on Walls with Openings (Bug 2744)

Verification of Stable Design in Final Design Check Iteration (Bug 2743)

Selection of Critical Segment in Design for Unknowns (Bug 2730)

Design for Distribution of Forces to Shearwall Segments Based on Rigidity

Output Warnings for Inadequate Stud Thickness for Hold-downs (Bug 2825)

Hold-down Stud Width for Capacity and Elongation (Bug 2826)

Levels and Directions for Out-of-Plane and Weak Storey Seismic Irregularities (Bug 2824)

NBC Terminology (Change 164)

Building Model and Program Operation