|
|
|
|
|
For following design results pertain to all design cases, so there is only one section or table in the results output for them.
Input Parameters
Tables appear showing the information you input about the structure regarding
Shear Line, Wall, and Opening Dimensions Table
This table shows, for each shear line, shear wall, and shear wall segment between openings
Sheathing Materials and Framing Materials
Because there can be more than one possible designed wall for a particular physical wall, and that many wall designs can share the identical material specifications the wall material specification for each wall group with distinct materials is shown in the Sheathing Materials and Framing Materials and Standard Wall Groups tables. The latter table also shows Standard Wall Groups that may be associated with these design groups.
The wall group numbers shown here are included in the Shear Line, Wall and Openings Dimensions, Shear Design, and Deflection tables, so it is necessary to cross reference all these tables to get a complete picture of the dimensions, materials, forces, deflections, and design strengths of your shear walls. If you want to see all this information in one place, go to Elevation View.
These tables refer to the wall groups by number and show the sheathing, nailing and framing information for each group, some material properties relevant to program calculations, such as the specific gravity and modulus of elasticity of the framing material and sheathing in-plane shear stiffness.
A number of design notes related to material provisions in the design standards appear beneath the tables, with a column in the table showing the note number(s) that apply to the wall group listed.