Contents

Welcome to Sizer  General Information  Program Operation  Loads and Analysis  Concept Mode  Materials  Engineering Design     Design Criteria     Design Codes and Standards        National Design Specification (NDS)           NDS 1.4 - Design Loads           NDS 3.1.2 - Net Section Area           NDS 2.3 - General Adjustment Factors           NDS 3.2 - Bending Members - General           NDS 3.3 - Bending Members - Flexure           NDS 3.4 - Bending Members - Shear           NDS 3.5 - Bending Members - Deflection           NDS 3.6 , 3.7 and C3.7.1 - Compression Members and Solid Columns           NDS C3.7.1 - Alternative Stability Factor for CLT Wall Panels           NDS 3.8 Tension Members           NDS 3.9 - Combined Bending and Axial Loading, and Biaxial Bending           NDS 3.10 - Design for Bearing           NDS 4.3 - Adjustment Factors (Sawn Lumber)           NDS 4.4 and 5.4- Special Design Considerations           NDS 5.3, Supplement Tables 5A-5D - Glulam Adjustment Factors           NDS Appendix D and Supplement Table 5- Glulam E'min           NDS 7 - Wood I-Joists           NDS 8 - Structural Composite Lumber           NDS 10.3 - CLT Adjustment Factors           NDS 10.4.1 - CLT Stiffness           NDS 15.2 and 15.3 - Spaced and Built-up Columns           NDS 15.4 - Wood Columns with Side Loads and Eccentricity           NDS C15.4 - CLT Combined Axial and Bending           NDS 16, AWC TR 10, and AWC Fire Standard - Fire Design           NDS Appendix N - LRFD Design        International Building Code (IBC)        Special Design Provisions for Wind and Seismic     Member Design     Material-specific Design  Versions  Index